Our 110kV and 220kV composite jacket line arresters have passed the type test of the National Insulator Arrester Testing Center and have performed well.Our company has adopted a unique design of core rod through ring resistor, directly crimping end fittings and reliable sealing process to make it have the tensile strength of suspension composite insulator. (Patent No.: 2007200155561.4).
Contact Now
GN38-12KV series indoor disconnectors are designed and manufactured to meet the needs of compact and miniaturized development of fixed high-voltage cabinets and ring network cabinets. It has a three position structure, fully insulated bottom plate, and is equipped with coaxial locking and perfect mechanical interlocking mechanism, which is compact in shape.
Contact Now
HJDW6 outdoor low-voltage knife switch is a single-phase AC 50HZ low-voltage switchgear, which is used in the power system with rated voltage of 0.5KV to connect or isolate the power supply when there is voltage and no load. The knife switch is operated with insulated hook bar The knife switch is a single-phase structure, and each phase is composed of a word mounting plate, a pillar insulator, a knife switch, a contact, etc. The upper end of the knife switch is provided with a fixed pull ring for opening and closing the insulating hook bar□ Operating environmenta.
Contact Now
The JN2-40.5 indoor high-voltage grounding switch is an indoor high-voltage electrical appliance designed in accordance with the relevant grounding switches in GB1985-89 AC High Voltage Disconnectors and Grounding Switches, which is equivalent to IEC129-84 Disconnectors and Grounding Switches and IEC694-84 Common Terms for High Voltage Switchgear and Control Equipment.JN2-40.5 grounding switch is applicable to 35KV and below three-phase AC 50HZ power system, and has voltage monitoring device.
Contact Now
The direct coupled low light level enhanced digital camera (idc1616) adopts the advanced image tube direct coupling technology to integrate the digital camera and image intensifier, forming a new generation of low illumination digital night vision equipment with compact structure, high sensitivity and clear imaging.
Contact Now
Low illumination CMOS is a new type of digital solid-state low light level imaging device. It has the characteristics of low illumination and high sensitivity. It can image clearly at low illumination (< 10-2lux).According to customer requirements, the development of helmet mounted low illumination CMOS camera and small batch trial production have been completed. Helmet mounted low illumination CMOS camera has the function of non direct viewing video, which is mainly used in the fields of investigation, counter-terrorism, communication and so on.
Contact Now
Type a double tube binocular low light level observation mirror has the characteristics of clear imaging, good concealment, light structure and low power consumption. The product is suitable for driving aircraft for takeoff, landing, low altitude and ultra-low altitude missions at night or in low illumination environment; It can also be used for vehicle driving, patrol, medical rescue, observation, monitoring and reading.
Contact Now
Type B double tube binocular low light level observation mirror can assist pilots to directly observe the environment and search targets in the night, complete night takeoff and landing, formation flight, visual recognition of landmark landform, heaven and earth line, aerial reconnaissance and recognition, search and recognition of ground targets at low altitude, and cooperate with forward-looking infrared to search.
Contact Now
CMOS hand-held night vision instrument is a portable photoelectric night vision instrument, which can observe the target under all-weather conditions.
Contact Now
The SEB range of Adjustable Width Cable Drum Trailers are designed to cope with the ever increasing size of Cable Drums, High Voltage cables are being laid underground instead of over headlines.
Contact Now
CMOS gun sight has the characteristics of all-weather operation, no night lighting, strong concealment, high reliability, long service life and low power consumption. It is suitable for observation and aiming in day and night, night or low illumination environment. high reliability, long service life and low power consumption.
Contact Now
Super second generation low light level image intensifiers: NT-3, cnt-4 and dnt-6 have greatly improved in signal-to-noise ratio, transmission and resolution, which makes them have higher spectral response in a wide wavelength range, and can obtain better contrast for various observation scenes, whether in jungle, desert, coast, water surface It has excellent observation effect under any background, such as snow. Dnt-6 image intensifier is equipped with power supply with automatic shutter characteristics, and can automatically adjust the gain.
Contact Now
Fuse selection The selection of the fuse should ensure that the distribution transformer internal or the high and low voltage outlet pipe can be quickly fused when there is a short circuit. In practice, the following principles are often used for selection; if the capacity of the distribution transformer is below 160KV, the fuse should be 2-2% of the rated current of the transformer.
Contact Now
The circuit breaker has the characteristics of small size, light weight, anti-condensation, maintenance-free, etc., and can adapt to harsh weather conditions and dirty environments.
Contact Now
Product OverviewGW1-12G (D) series outdoor high-voltage disconnectors are unipolar high-voltage switchgear. They are used to open and close the circuit when there is voltage or no load in the outdoor 12KV line network. The switches with grounding knives are equipped with CS mouth type manual mechanisms to prevent the misoperation of live grounding wires and grounding wires, "closing", etc.
Contact Now
ZFN21-12D/630-20, ZFN21-12DR/T125-31.5 high-voltage vacuum load switch and combination apparatus are used in three-phase AC 10KV, 50Hz power distribution system. It has the advantages of compact structure, small volume, light weight, long service life, strong making and breaking capacity, safety and reliability, etc.
Contact Now
(H) GW4 type outdoor high-voltage disconnector is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, which is used for opening and closing of lines under the condition of voltage and no load, and for electrical isolation of electrical equipment such as overhauled high-voltage buses and circuit breakers from live high-voltage lines. It can also be used for opening and closing small capacitive or inductive currents. When the knife switch is in the normal opening position, an insulation distance meeting the safety requirements can be provided.
Contact Now
Low-voltage cable lines are widely used in low-voltage power distribution systems because of their reliable operation, lack of poles, lack of ground occupation, lack of unsightliness, and less influence from the outside world.ApplicationFixed indoor, outdoor and underground installations.StandardsHD 603-5D SI, IEC 60502-1,IEC 60332-1 Cat. B.
Contact Now
1) It is used to protect electrical equipment from high transient over-voltage and limit the freewheeling time and the freewheeling amplitude.
Contact Now
use environment a. The altitude does not exceed 1000 meters; b. The surrounding air environment has no conductive dust and no corrosive, flammable and explosive gases, etc.; c. Wind pressure does not exceed 100Pa (equivalent to wind speed 34m/S); d. The earthquake intensity does not exceed magnitude 8; e. The annual temperature difference ratio is within ±40°C.
Contact Now
