Metal Oxide ResistorsThe metal oxide resistor is the core part of the lightning arrester. It uses zinc oxide as the main component, adding a small amount of bismuth oxide, cobalt oxide, chromium oxide, manganese carbonate, antimony oxide and other trace additives, and is sintered at high temperature. The microstructure of metal oxide resistors is mainly composed of zinc oxide grains, grain boundary layer and spinel phase.
Contact Now
•Note：1,(DEBI Equivalent background illumination, measured after up to 2 minutes stabilization in the dark with the operational voltage applied.2,Signal to noise ratio : measured in the circle(diameter:0.2), equivalent system frequency.3,On the area of 1mm² .illumination flux 0.05lm,lasting 60 seconds .4,Measured for 0.3ms both parallel and perpendicular to the axis separately with power supply applied, totally for 6 times.
Contact Now
wire galloping has brought immeasurable economic losses and social impacts to our country. The composite interphase spacer is a kind of line that can effectively prevent the galloping of line conductors to keep the line safe, and effectively reduce the space of the transmission corridor. It is listed as a compact high-voltage transmission line 2220kV and below in the guidelines for galloping prevention and control of the State Grid Corporation of China.
Contact Now
The discharge counter for lightning arrester is a high-voltage electrical apparatus used to monitor the discharge action of lightning arrester. Its structure consists of nonlinear resistance, electromagnetic counter and some electronic components. Under normal operating voltage, the leakage current flowing through the counter is very small, and the counter does not act.
Contact Now
Super second generation low light level image intensifiers: NT-3, cnt-4 and dnt-6 have greatly improved in signal-to-noise ratio, transmission and resolution, which makes them have higher spectral response in a wide wavelength range, and can obtain better contrast for various observation scenes, whether in jungle, desert, coast, water surface It has excellent observation effect under any background, such as snow. Dnt-6 image intensifier is equipped with power supply with automatic shutter characteristics, and can automatically adjust the gain.
Contact Now
Low illumination CMOS is a new type of digital solid-state low light level imaging device. It has the characteristics of low illumination and high sensitivity. It can image clearly at low illumination (< 10-2lux).According to customer requirements, the development of helmet mounted low illumination CMOS camera and small batch trial production have been completed. Helmet mounted low illumination CMOS camera has the function of non direct viewing video, which is mainly used in the fields of investigation, counter-terrorism, communication and so on.
Contact Now
Electrified railway is a railway with electric locomotive as the basic traction force. It is composed of electric locomotive and electric power supply system.The power supply of the electrified railway is from the national grid. The high-voltage alternating current from the State Grid is sent to the railway traction substation for the first time of voltage reduction, and then sent to the overhead contact system.
Contact Now
Front discharge detector, power detector, mainboard detector, front discharge tooling cable, power tooling cable, mainboard tooling cable, scanner tooling cable, refrigerator, detector tooling cable, display detector, special tooling cable for thermal sensing head.1.Software version identification and software loading of thermal sensor head of thermal imager;2.Simulation control of thermal sensor head of thermal imager;3.Adjustment of internal parameters of thermal sensor head of thermal imager;4.Fault discrimination of thermal sensor head, display / controller and cable assembly of thermal im
Contact Now
Hjk-m series monitoring thermal imager can be used in industrial production detection, chemical industry and precision electronics. Equipped with this series of thermal image products, it is like a special eye to break the dark cover and uncover all kinds of camouflage.This series of monitoring thermal imager adopts modular and standardized design, which can be quickly and easily installed on various vehicles and ships currently equipped.
Contact Now
It is mainly used for non-contact monitoring of dangerous gas leakage at industrial site. It can also be used for coal mine monitoring, high-voltage power transmission and transformation detection, subway safety monitoring, environmental protection and fire rescue.Types of industrial hazardous gases that can be monitored:Hydrogen sulfide, ammonia, propane, sulfur dioxide, methanol, ethylene, methane, sulfur hexafluoride, dichloromethane, ether.
Contact Now
Features of arrester with series gap □ Product model description1. Under normal conditions, the series gap of the arrester isolates the arrester from the system, and the arrester does not participate in the operation, thus prolonging its service life;2. For the system with frequent voltage fluctuation, the gap can be broken down to make the arrester work only when the voltage exceeds the specified value, avoiding the frequent action of the gapless arrester;3.
Contact Now
CMOS hand-held night vision instrument is a portable photoelectric night vision instrument, which can observe the target under all-weather conditions.
Contact Now
The turret assembly of situational awareness system carries two photoelectric sensors, thermal imager and TV camera, for image acquisition. It also integrates GPS and electronic compass, which can solve the target and local position. It can ensure the stable scanning of circumferential view through the step-by-step scanning stability platform, realize panoramic imaging, and then communicate with the display and control terminal through the wireless or optical fiber transmission module inside the turret.
Contact Now
The low light level sight integrates the functions of observing and aiming, measuring the target distance and setting the weapon firing angle. It has the characteristics of small volume, light weight, high aiming accuracy, good reliability and convenient carrying. It can be used not only as a night sight, but also as an observation command mirror for night observation. It is mainly used for observation and monitoring by personnel of border armed police, public security and other units, and it is a precision optical instrument product for assisting gun aiming and shooting at night.
Contact Now
Itc-3c adopts the modular design idea. The three optical axes of thermal imager, laser ranging system and CCD camera system are parallel to each other. It can output two analog video signals in the infrared and visible bands of the target and background (the two bands are independent of each other). If necessary, it can range the target according to the overall instruction.
Contact Now
High performance multi-functional low light level night vision instrument is an optical and electronic instrument which can observe the external scenery with the help of weak natural light (such as moonlight, starlight or atmospheric glow) when there is no lighting at night. It is a passive night vision instrument with good concealment.
Contact Now
Using the existing image intensifier technology, the antimony cesium photocathode UV image intensifier is successfully developed, with UV transparent quartz glass as the input window and double proximity focusing image intensifier. Solar blind UV imaging detection module is an imaging detection product for solar blind UV band based on UV image intensifier manufacturing technology, combined with optical design technology and electronic signal processing technology. It is mainly composed of solar blind UV coupling module, solar blind UV optical module and signal processing module.
Contact Now
Our 110kV and 220kV composite jacket line arresters have passed the type test of the National Insulator Arrester Testing Center and have performed well.Our company has adopted a unique design of core rod through ring resistor, directly crimping end fittings and reliable sealing process to make it have the tensile strength of suspension composite insulator. (Patent No.: 2007200155561.4).
Contact Now
Composite insulators are composed of three parts: insulating core rod, silicone rod rubber sheath and connecting fittings at both ends. Insulating mandrel is the abbreviation of epoxy resin fiberglass lead rod, it is the skeleton of composite insulator, it plays multiple functions such as supporting umbrella cover, inner insulation, connecting hardware at both ends, and bearing mechanical load, etc.
Contact Now
It integrates the functions of visible light CCD, laser ranging, GPS / Beidou Positioning second generation, electronic compass and data recording. It has the characteristics of low power consumption, small volume, light weight, compact structure, simple operation and portability to complete the detection, aiming, ranging and positioning of targets.
Contact Now
