The direct coupled low light level enhanced digital camera (idc1616) adopts the advanced image tube direct coupling technology to integrate the digital camera and image intensifier, forming a new generation of low illumination digital night vision equipment with compact structure, high sensitivity and clear imaging.
Contact Now
The SEB range of Adjustable Width Cable Drum Trailers are designed to cope with the ever increasing size of Cable Drums, High Voltage cables are being laid underground instead of over headlines.
Contact Now
Designed and supplied specifically for "Off Road Use", these Site trailers are all fitted with some form of brake system, hand parking facility and basic vehicle lights. Although not built to conform with EEC braking/lighting directives certain Non EEC countries have operated these units on the highway under the proviso that Towing speeds indicated must not be exceeded at full rated payload.
Contact Now
The multifunctional handheld thermal imager has the functions of infrared, visible light observation, GPS positioning, orientation and laser ranging, and can realize the observation of targets in day and night and under adverse weather conditions
Contact Now
Low illumination CMOS is a new type of digital solid-state low light level imaging device. It has the characteristics of low illumination and high sensitivity. It can image clearly at low illumination (< 10-2lux).According to customer requirements, the development of helmet mounted low illumination CMOS camera and small batch trial production have been completed. Helmet mounted low illumination CMOS camera has the function of non direct viewing video, which is mainly used in the fields of investigation, counter-terrorism, communication and so on.
Contact Now
The role of drop-out fuses10kV equipment can be installed on the high-voltage side of the transformer on the pole, where the transformer and capacitor are connected to the line. The drop-out fuse can effectively protect the circuit from overload and short-circuit. At the same time, it can also be installed at the end of a long line or on a branch line, which can provide extended protection for areas that cannot be protected by relays.
Contact Now
1. After opening, establish a reliable insulation gap to separate the equipment or lines to be repaired from the power supply with an obvious disconnection point to ensure the safety of maintenance personnel and equipment [2].2. Change the circuit according to the operation needs.3. It can be used to open and close the small current in the line, such as the charging current of bushing, bus, connector and short cable, the capacitive current of switch voltage equalizing capacitor, the circulating current during double bus switching and the excitation current of voltage transformer.4.
Contact Now
Features of arrester with series gap □ Product model description1. Under normal conditions, the series gap of the arrester isolates the arrester from the system, and the arrester does not participate in the operation, thus prolonging its service life;2. For the system with frequent voltage fluctuation, the gap can be broken down to make the arrester work only when the voltage exceeds the specified value, avoiding the frequent action of the gapless arrester;3.
Contact Now
Reference standardsGB11032-2000 AC gapless metal oxide arresterJB/T8952-2005 Metal Oxide Surge Arrester with Composite Jacket for AC SystemJB/T10497-2005 Metal Oxide Surge Arresters with Series Gap and Composite Jacket for AC Transmission LinesGB311.11-1997 Insulation Coordination of High Voltage Transmission and Transformation EquipmentJB/T8459-2006 Preparation Method of Arrester Product Model□ Structural characteristics1.
Contact Now
The turret assembly of situational awareness system carries two photoelectric sensors, thermal imager and TV camera, for image acquisition. It also integrates GPS and electronic compass, which can solve the target and local position. It can ensure the stable scanning of circumferential view through the step-by-step scanning stability platform, realize panoramic imaging, and then communicate with the display and control terminal through the wireless or optical fiber transmission module inside the turret.
Contact Now
Itc-3c adopts the modular design idea. The three optical axes of thermal imager, laser ranging system and CCD camera system are parallel to each other. It can output two analog video signals in the infrared and visible bands of the target and background (the two bands are independent of each other). If necessary, it can range the target according to the overall instruction.
Contact Now
Product OverviewGW1-12G (D) series outdoor high-voltage disconnectors are unipolar high-voltage switchgear. They are used to open and close the circuit when there is voltage or no load in the outdoor 12KV line network. The switches with grounding knives are equipped with CS mouth type manual mechanisms to prevent the misoperation of live grounding wires and grounding wires, "closing", etc.
Contact Now
All of the Cable Trailers described below are equipped with braking and road lighting systems to conform to the relevant European type approval specifications and are designed to travel fully laden at road speeds indicated on all European highways. Our full range of highway cable drum trailers and trailer mounted winches can now be used within all European countries without the need for additional individual country inspectionsand approval.For safe and easy drum handling, all SEB Cable Drum Trailers are fitted with hydraulic hand pump operated Iift/lower systems as standard.
Contact Now
X4 UAV miniaturized thermal imager is a small thermal imager specially designed for UAV. It has the characteristics of light weight, small volume, low power consumption, strong environmental adaptability and simple operation. The lens of the product is designed by optical passive heat difference elimination technology. It works in an ultra wide temperature range of - 40 ℃ ~ 55 ℃ without focusing, and can adapt to different areas and indoor and outdoor environments.
Contact Now
Drop type (drop type, detachable type) lightning arrester is a distribution type zinc oxide lightning arrester that is modified and skillfully installed on the drop type mechanism of the drop type fuse, so that the lightning arrester can be easily detected, repaired and replaced with the help of an insulating switch lever under the condition of continuous power supply, which not only ensures the smoothness of the line, but also greatly reduces the work intensity and time of power maintenance personnel, It is especially suitable for places that are not suitable for power failure, such as post a
Contact Now
The uncooled infrared focal plane thermal camera core assembly is adopted, which has the characteristics of small volume, light weight, long action distance and easy operation. The product can be used day and night, and has the ability to penetrate smoke and fog. It can "see" the target through the jungle and some shelters. The product is suitable for aiming, observation and search.
Contact Now
It integrates the functions of visible light CCD, laser ranging, GPS / Beidou Positioning second generation, electronic compass and data recording. It has the characteristics of low power consumption, small volume, light weight, compact structure, simple operation and portability to complete the detection, aiming, ranging and positioning of targets.
Contact Now
1. Reasonable design, novel structure, reliable technical performance, compact shape, light weight, flexible installation, high tensile strength, collision resistance, and no damage during transportation;2. The advantages of silicon rubber sheathed metal oxide arrester are cited.
Contact Now
Our 110kV and 220kV composite jacket line arresters have passed the type test of the National Insulator Arrester Testing Center and have performed well.Our company has adopted a unique design of core rod through ring resistor, directly crimping end fittings and reliable sealing process to make it have the tensile strength of suspension composite insulator. (Patent No.: 2007200155561.4).
Contact Now
installation and use 1. The fuse allows horizontal or vertical installation 2. When the data of the melt tube does not match the voltage and rated current of the line, it must not be connected to the line for use. 3.
Contact Now
The overall structure of this product adopts a three-phase common box type, the bushing enters and exits the line, the box is filled with dry air, and the electric spring fan operating mechanism is arranged on the side of the box, which can be used reliably under severe environmental conditions. The vacuum interrupter of this product adopts ceramic shell, cup-shaped longitudinal magnetic field contact structure, copper chromium contact material, and has excellent breaking and closing short-circuit current capacity. The product is small in size, light in
Contact Now
The multifunctional handheld thermal imager has the functions of infrared, visible light observation, GPS positioning, orientation and laser ranging, and can realize the observation of targets in day and night and under adverse weather conditions
Contact Now
wire galloping has brought immeasurable economic losses and social impacts to our country. The composite interphase spacer is a kind of line that can effectively prevent the galloping of line conductors to keep the line safe, and effectively reduce the space of the transmission corridor. It is listed as a compact high-voltage transmission line 2220kV and below in the guidelines for galloping prevention and control of the State Grid Corporation of China.
Contact Now
