All of the Cable Trailers described below are equipped with braking and road lighting systems to conform to the relevant European type approval specifications and are designed to travel fully laden at road speeds indicated on all European highways. Our full range of highway cable drum trailers and trailer mounted winches can now be used within all European countries without the need for additional individual country inspectionsand approval.For safe and easy drum handling, all SEB Cable Drum Trailers are fitted with hydraulic hand pump operated Iift/lower systems as standard.
Contact Now
The SEB range of Adjustable Width Cable Drum Trailers are designed to cope with the ever increasing size of Cable Drums, High Voltage cables are being laid underground instead of over headlines.
Contact Now
FN12-12 and FN12-12R combined apparatus are three-phase high-voltage switchgear with a rated voltage of 12KV and a rated frequency of 50Hz. They are used for breaking and closing load current, closed-loop current, no-load transformer and cable charging current, closing short circuit current, and load switches equipped with grounding switches.
Contact Now
X4 UAV miniaturized thermal imager is a small thermal imager specially designed for UAV. It has the characteristics of light weight, small volume, low power consumption, strong environmental adaptability and simple operation. The lens of the product is designed by optical passive heat difference elimination technology. It works in an ultra wide temperature range of - 40 ℃ ~ 55 ℃ without focusing, and can adapt to different areas and indoor and outdoor environments.
Contact Now
This unit has been specifically designed to meet the needs of contractors where the necessiiy or the ability to have a Cable Drum Trailer is simply not practical.Available with either a fixed spindle (shown), i.e. drum loaded by external means, or supplied self sufficient in lifting and lowering as used on standard Cable Drum Trailers in our range.The unit comes with a range of options to suit most applications for both the Utility and Rail industries.Diesel, Petrol, Electric or PTO Drum Drive system for ease of cable payout, unit can be pendant controlled.
Contact Now
Designed and supplied specifically for "Off Road Use", these Site trailers are all fitted with some form of brake system, hand parking facility and basic vehicle lights. Although not built to conform with EEC braking/lighting directives certain Non EEC countries have operated these units on the highway under the proviso that Towing speeds indicated must not be exceeded at full rated payload.
Contact Now
The lightning arrester is connected between the cable and the earth, usually in parallel with the protected equipment. The lightning arrester can effectively protect communication equipment. Once abnormal voltage occurs, the lightning arrester will act to protect. When the communication cable or equipment is operating under normal working voltage, the arrester will not work and will be regarded as open circuit to the ground.
Contact Now
Due to electromagnetic induction, the metal shielding layer (or metal sheath) of long line high-voltage single core power cables generates induced voltage, which leads to aging of insulation and reduction of insulation grade, resulting in reduced cable life. Once the induced voltage exceeds the sheath breakdown voltage, the outer sheath is broken down, forming a multi-point grounding fault of single core cables.
Contact Now
Front discharge detector, power detector, mainboard detector, front discharge tooling cable, power tooling cable, mainboard tooling cable, scanner tooling cable, refrigerator, detector tooling cable, display detector, special tooling cable for thermal sensing head.1.Software version identification and software loading of thermal sensor head of thermal imager;2.Simulation control of thermal sensor head of thermal imager;3.Adjustment of internal parameters of thermal sensor head of thermal imager;4.Fault discrimination of thermal sensor head, display / controller and cable assembly of thermal im
Contact Now
Night vision instrument is mainly used to identify targets at close range (250mm ~ 10m) at night, operate equipment, read documents and observe. For target search. The low illumination CCD and infrared lighting mode can also be replaced by ICCD mode.
Contact Now
Low-voltage cable lines are widely used in low-voltage power distribution systems because of their reliable operation, lack of poles, lack of ground occupation, lack of unsightliness, and less influence from the outside world.ApplicationFixed indoor, outdoor and underground installations.StandardsHD 603-5D SI, IEC 60502-1,IEC 60332-1 Cat. B.
Contact Now
1. After opening, establish a reliable insulation gap to separate the equipment or lines to be repaired from the power supply with an obvious disconnection point to ensure the safety of maintenance personnel and equipment [2].2. Change the circuit according to the operation needs.3. It can be used to open and close the small current in the line, such as the charging current of bushing, bus, connector and short cable, the capacitive current of switch voltage equalizing capacitor, the circulating current during double bus switching and the excitation current of voltage transformer.4.
Contact Now
The general low light level gun sight is a sight with high definition, good combination of gun and mirror, strong adaptability, reliability and durability, stable performance, good man-machine efficiency and low cost. It is suitable for short-range accurate shooting at night and can solve the rapid aiming and accurate shooting at 25-100 meters at night. The fixture can be quickly changed to adapt to various gun types.
Contact Now
A range of Trailer mounted Cable Pulling Winches required for the installation of Power Cables where high
pulling tensions are required.
All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units
are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are
fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the
pulling force applied.
Contact Now
The day and night gun sight can realize all-weather close-range accurate shooting in the daytime, night and low illumination environment, and can solve the rapid aiming and accurate shooting at night from 25m to 100m.and can solve the rapid aiming and accurate shooting at night from 25m to 100m.night and low illumination environment, The day and night gun sight can realize all-weather close-range accurate shooting in the daytime,
Contact Now
Itc-3c adopts the modular design idea. The three optical axes of thermal imager, laser ranging system and CCD camera system are parallel to each other. It can output two analog video signals in the infrared and visible bands of the target and background (the two bands are independent of each other). If necessary, it can range the target according to the overall instruction.
Contact Now
Super second generation low light level image intensifiers: NT-3, cnt-4 and dnt-6 have greatly improved in signal-to-noise ratio, transmission and resolution, which makes them have higher spectral response in a wide wavelength range, and can obtain better contrast for various observation scenes, whether in jungle, desert, coast, water surface It has excellent observation effect under any background, such as snow. Dnt-6 image intensifier is equipped with power supply with automatic shutter characteristics, and can automatically adjust the gain.
Contact Now
Long focal length: it can provide higher spatial frequency for the system to be tested; Large aperture: provide testing possibility for multi-channel optical system; The target plate and blackbody have high infrared emissivity; The system is equipped with vibration isolation air cushion platform; Electrically controlled target wheel is easy to operate and replace; It can meet the test of large aperture thermal imaging system; It can realize the semi-automatic test of all the main parameters of the thermal imager system; High performance test software system.The parameters of the thermal imager
Contact Now
Product OverviewGW1-12G (D) series outdoor high-voltage disconnectors are unipolar high-voltage switchgear. They are used to open and close the circuit when there is voltage or no load in the outdoor 12KV line network. The switches with grounding knives are equipped with CS mouth type manual mechanisms to prevent the misoperation of live grounding wires and grounding wires, "closing", etc.
Contact Now
(H) GW13 type neutral point disconnector is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, which is used for opening and closing the neutral point connection of transformer without load. When the knife switch is in the normal opening position, an insulation distance meeting the safety requirements can be provided.□ Structure1. Single pole V-shaped double post rotary structure, with small floor area, mainly consists of base, post insulator, conductive circuit, operating mechanism, etc.2.
Contact Now
(H) GW4 type outdoor high-voltage disconnector is used for three-phase AC 50Hz outdoor high-voltage electrical equipment, which is used for opening and closing of lines under the condition of voltage and no load, and for electrical isolation of electrical equipment such as overhauled high-voltage buses and circuit breakers from live high-voltage lines. It can also be used for opening and closing small capacitive or inductive currents. When the knife switch is in the normal opening position, an insulation distance meeting the safety requirements can be provided.
Contact Now
Fuse selection The selection of the fuse should ensure that the distribution transformer internal or the high and low voltage outlet pipe can be quickly fused when there is a short circuit. In practice, the following principles are often used for selection; if the capacity of the distribution transformer is below 160KV, the fuse should be 2-2% of the rated current of the transformer.
Contact Now
Low illumination CMOS is a new type of digital solid-state low light level imaging device. It has the characteristics of low illumination and high sensitivity. It can image clearly at low illumination (< 10-2lux).According to customer requirements, the development of helmet mounted low illumination CMOS camera and small batch trial production have been completed. Helmet mounted low illumination CMOS camera has the function of non direct viewing video, which is mainly used in the fields of investigation, counter-terrorism, communication and so on.
Contact Now
