The SEB range of Adjustable Width Cable Drum Trailers are designed to cope with the ever increasing size of Cable Drums, High Voltage cables are being laid underground instead of over headlines.
Contact Now
All of the Cable Trailers described below are equipped with braking and road lighting systems to conform to the relevant European type approval specifications and are designed to travel fully laden at road speeds indicated on all European highways. Our full range of highway cable drum trailers and trailer mounted winches can now be used within all European countries without the need for additional individual country inspectionsand approval.For safe and easy drum handling, all SEB Cable Drum Trailers are fitted with hydraulic hand pump operated Iift/lower systems as standard.
Contact Now
This unit has been specifically designed to meet the needs of contractors where the necessiiy or the ability to have a Cable Drum Trailer is simply not practical.Available with either a fixed spindle (shown), i.e. drum loaded by external means, or supplied self sufficient in lifting and lowering as used on standard Cable Drum Trailers in our range.The unit comes with a range of options to suit most applications for both the Utility and Rail industries.Diesel, Petrol, Electric or PTO Drum Drive system for ease of cable payout, unit can be pendant controlled.
Contact Now
Front discharge detector, power detector, mainboard detector, front discharge tooling cable, power tooling cable, mainboard tooling cable, scanner tooling cable, refrigerator, detector tooling cable, display detector, special tooling cable for thermal sensing head.1.Software version identification and software loading of thermal sensor head of thermal imager;2.Simulation control of thermal sensor head of thermal imager;3.Adjustment of internal parameters of thermal sensor head of thermal imager;4.Fault discrimination of thermal sensor head, display / controller and cable assembly of thermal im
Contact Now
Due to electromagnetic induction, the metal shielding layer (or metal sheath) of long line high-voltage single core power cables generates induced voltage, which leads to aging of insulation and reduction of insulation grade, resulting in reduced cable life. Once the induced voltage exceeds the sheath breakdown voltage, the outer sheath is broken down, forming a multi-point grounding fault of single core cables.
Contact Now
The lightning arrester is connected between the cable and the earth, usually in parallel with the protected equipment. The lightning arrester can effectively protect communication equipment. Once abnormal voltage occurs, the lightning arrester will act to protect. When the communication cable or equipment is operating under normal working voltage, the arrester will not work and will be regarded as open circuit to the ground.
Contact Now
FN12-12 and FN12-12R combined apparatus are three-phase high-voltage switchgear with a rated voltage of 12KV and a rated frequency of 50Hz. They are used for breaking and closing load current, closed-loop current, no-load transformer and cable charging current, closing short circuit current, and load switches equipped with grounding switches.
Contact Now
A range of Trailer mounted Cable Pulling Winches required for the installation of Power Cables where high
pulling tensions are required.
All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units
are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are
fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the
pulling force applied.
Contact Now
Low-voltage cable lines are widely used in low-voltage power distribution systems because of their reliable operation, lack of poles, lack of ground occupation, lack of unsightliness, and less influence from the outside world.ApplicationFixed indoor, outdoor and underground installations.StandardsHD 603-5D SI, IEC 60502-1,IEC 60332-1 Cat. B.
Contact Now
1. After opening, establish a reliable insulation gap to separate the equipment or lines to be repaired from the power supply with an obvious disconnection point to ensure the safety of maintenance personnel and equipment [2].2. Change the circuit according to the operation needs.3. It can be used to open and close the small current in the line, such as the charging current of bushing, bus, connector and short cable, the capacitive current of switch voltage equalizing capacitor, the circulating current during double bus switching and the excitation current of voltage transformer.4.
Contact Now
The low light level sight integrates the functions of observing and aiming, measuring the target distance and setting the weapon firing angle. It has the characteristics of small volume, light weight, high aiming accuracy, good reliability and convenient carrying. It can be used not only as a night sight, but also as an observation command mirror for night observation. It is mainly used for observation and monitoring by personnel of border armed police, public security and other units, and it is a precision optical instrument product for assisting gun aiming and shooting at night.
Contact Now
Conductive partThe fixed contact is composed of a copper plate bent into a right angle, and the perforated end of the fixed contact can be connected with the bus through a screw; The other end is short, and it contacts the moving blade (moving contact) when closing.Two copper plates form a contact strip, also known as a moving contact, which can rotate around the shaft for a certain angle. When closing, it holds the static contact. There is a clamping spring between the two copper plates to adjust the contact pressure between the dynamic and static contacts.
Contact Now
The circuit breaker has the characteristics of small size, light weight, anti-condensation, maintenance-free, etc., and can adapt to harsh weather conditions and dirty environments.
Contact Now
It is mainly used to break and close the load current, overload current and short-circuit current of the power system. It is suitable for protection and control of substations, industrial and mining enterprises, and urban and rural distribution networks, especially for places with frequent operations and urban automatic distribution networks. This product is matched with the controller, which can meet the requirements of the distribution automation system, and can reliably and effectively complete the traditional recloser function.
Contact Now
The main function Vacuum arc extinguishing is adopted, with strong breaking capacity, long electrical life and mechanical life of 10,000 times; Simple structure, maintenance-free, no long maintenance period; Good insulation performance, strong anti-pollution ability; Equipped with spring or electromagnetic operating mechanism, the mechanical performance is reliable and can be operated frequently; No fire and explosion hazards; built-in current transformer, the accuracy reaches 0.2 level, and can real
Contact Now
Fuse selection The selection of the fuse should ensure that the distribution transformer internal or the high and low voltage outlet pipe can be quickly fused when there is a short circuit. In practice, the following principles are often used for selection; if the capacity of the distribution transformer is below 160KV, the fuse should be 2-2% of the rated current of the transformer.
Contact Now
Advanced stirling cooler for cooled infrared detectors.Made in China. Made in China. Details please see the picture. Made in China. Details please see the picture. Advanced stirling cooler for cooled infrared detectors.Details please see the picture. Made in China. Advanced stirling cooler for cooled infrared detectors.
Contact Now
Hjk-m series monitoring thermal imager can be used in industrial production detection, chemical industry and precision electronics. Equipped with this series of thermal image products, it is like a special eye to break the dark cover and uncover all kinds of camouflage.This series of monitoring thermal imager adopts modular and standardized design, which can be quickly and easily installed on various vehicles and ships currently equipped.
Contact Now
Vehicles and ships are only essential equipment in urban anti-terrorism, public security crime collection and border and coastal defense patrols. Equipped with on-board infrared thermal imager is to equip vehicles with special eyes to break the dark cover and uncover various camouflages.The on-board infrared thermal imager adopts modular and standardized design, which can be quickly and easily installed on various vehicles equipped at present.
Contact Now
For border and coastal defense monitoring and important places, long-distance and ultra long-distance observation equipment is essential. Long focus and multi field of view infrared thermal imager products can well meet the needs of long-distance observation at night. The infrared optical system designed with long focus and multi field of view can not only meet the needs of target search, but also meet the needs of further observation.
Contact Now
Long focal length: it can provide higher spatial frequency for the system to be tested; Large aperture: provide testing possibility for multi-channel optical system; The target plate and blackbody have high infrared emissivity; The system is equipped with vibration isolation air cushion platform; Electrically controlled target wheel is easy to operate and replace; It can meet the test of large aperture thermal imaging system; It can realize the semi-automatic test of all the main parameters of the thermal imager system; High performance test software system.The parameters of the thermal imager
Contact Now
For border and coastal defense monitoring and important places, long-distance and ultra long-distance observation equipment is essential. Long focus and multi field of view infrared thermal imager products can well meet the needs of long-distance observation at night. The infrared optical system designed with long focus and multi field of view can not only meet the needs of target search, but also meet the needs of further observation.
Contact Now
Electrified railway is a railway with electric locomotive as the basic traction force. It is composed of electric locomotive and electric power supply system.The power supply of the electrified railway is from the national grid. The high-voltage alternating current from the State Grid is sent to the railway traction substation for the first time of voltage reduction, and then sent to the overhead contact system.
Contact Now
